Filter worksheets by topic

Creating and managing a survey
  • Questionnaire design
  • Archive and Restore
  • Analysis
  • Respondent Databases
Different outputs
  • Paper
  • Online
  • Scanning
  • Mobile Interviewing
  • Snap WebHost
  • Online/Electronic
Add-ons and extras
  • Languages
  • SurveyPak
  • Snap ToolKit
  • Snap Panel Samples
  • Show all

Running the Summary report to context (WS:151)

This worksheet shows you how to run the Summary report to context and produce a report output for each context.

Identifying where the respondent has accessed the survey from (WS:150)

This worksheet describes how to use the paradata variable ID.site, so that you can track where the respondent has accessed the survey from.

Saving and Resuming Surveys in Snap Mobile Anywhere (WS:149)

You can set up a Snap Mobile Anywhere survey that allows the interviewer to save responses and continue later.

Entering data from paper surveys (WS:148)

This worksheet describes how to enter responses from paper questionnaires using prompted mode. Prompted mode is the mode that the Snap Surveys data entry team prefer to use.

Seeding data into a follow-up survey (WS:147)

This worksheet describes how to use one survey to automatically invite respondents to complete a follow-up survey using event feedback as an example.

Combine responses from paper and web surveys to share reports online (WS:146)

With this worksheet you can learn how to combine responses from paper and web surveys to share reports online.

Options available to Analysis Associates (WS:145)

You can allow Analysis Associates to access your shared results in WebHost. This worksheet describes how.

Deleting a Survey in Snap Professional and Snap WebHost (WS:144)

With this worksheet you can learn how to delete surveys from both Snap Professional and from Snap WebHost.

Recording the Whole Interview (WS:143)

This worksheet describes how to add an audio recording variable to a questionnaire to enable a whole interview to be recorded. There are also some important relevant notes on privacy considerations are at the end of this worksheet.

Creating your own interactive images (WS:142)

This worksheet describes how to use your own images to make a question interactive and more engaging.

Amending an individual’s information held within your WebHost survey (WS:141)

This worksheet outlines how to amend a respondent’s submitted response data and any respondent details used for the email invites/logins list.

Drag and Drop (WS:140)

With this worksheet you can learn how to make a standard Grid First question interactive and more engaging, by transforming it into a Drag and Drop for Ranking.

Removing an individual’s data from your WebHost survey (WS:139)

This worksheet outlines how to remove a respondent’s submitted response data and any respondent details used for the email invites/logins list.

Adding an emoji to an email invite (WS:138)

This worksheet covers how to insert emojis into the subject or body of an email invite sent from Snap Webhost.

Download and export survey data (WS:137)

Survey responses saved in Snap WebHost can be downloaded and imported with a single click – there’s no need to log in to Snap WebHost to access new survey replies.

Place a marker against potential respondents (WS:136)

This worksheet covers how to prevent further survey invitations and reminder messages from being sent.

Sending SMS survey invitations in Snap WebHost (WS:135)

Create email invitations and reminders to be sent out as SMS messages using an SMS messaging service plus enable respondents to access the survey directly from the SMS message. This worksheet also details how to test if the survey links are working correctly.

Including an Opt Out link in an email invitation for Snap WebHost (WS:134)

This worksheet describes how to insert an Opt Out link into an email so that a respondent can choose to opt out of that survey.

Including a Consent Question in your Survey (WS:133)

Under the GDPR, all organizations must have a documented lawful basis for processing personal data. If you choose to use consent as the basis for collecting and processing survey response data, Snap allows you to provide potential respondents with the relevant information that they need to give informed consent, and also to configure your survey to obtain the respondent’s consent to proceed with the survey.

Anonymizing data after carrying out your survey (WS: 132)

It is possible to Anonymize your survey data after you have carried your survey out. This may be particularly useful where you want to continue to work with your survey data, but don’t need to keep hold of it in a form which still identifies your respondents.

Anonymization in Surveys – Sending an email that includes a unique respondent identifier (WS: 131)

In these surveys, you upload your respondent database to Snap WebHost, but you are not able to match the survey responses to a given respondent.  You can, however, track whether a given respondent has responded and if not, send them reminder emails.

Anonymization in Surveys – Sending an email that doesn’t identify the respondent (WS: 130)

In these surveys, you upload your respondent database in WebHost, but survey responses are not linked to a given respondent. Respondents are not tracked to identify whether they have responded, although if a respondent opts out of the survey WebHost will record this to ensure that they do not receive reminder emails.

Making surveys anonymous (WS: 129)

Snap offers you various options in terms of anonymizing your survey data, from running fully anonymous surveys with no personal data submitted to WebHost, to being able to identify if a respondent has responded but not linking them to their response, to removing identifiers from the data after collection so that your further processing is on anonymised data only.

Using logos for Retina and high density devices (WS: 128)

Modern devices like tablets and smartphones have high-definition screens that require high-resolution images. Learn how to size and insert your company logo so that it looks good on both standard and high-density screens.

Allowing respondents to attach files to a questionnaire (WS: 127)

With Snap’s AttachIt feature learn how your respondents can attach files (pictures, documents, etc.) as answers to individual questions and how you can then download these files which will be tagged with a unique id representing the respondent and the question number.

Working with columns (WS: 126)

Learn how to use the column settings in order to place certain questions side by side.

Change category colors in charts (WS: 125)

Change chart colors to match your organisation’s branding, or to better reflect the category name.

Summarise rating scale responses with Group Variables (WS: 124)

Quickly evaluate overall responses to questions in a grid, and make comparisons between separate question grids in your survey.

Create a chart of positive responses to rating scale questions (WS: 123)

Learn how to create an ‘Overall’ category for responses to all questions in a grid, and add the ‘Overall’ category to a Horizontal bar chart.

Capture audio responses to survey questions (WS: 122)

With this new development for Snap Mobile Anywhere, you can easily capture rich qualitative data – expressed in the participants’ own words – with up to one hour recording time per question.

Using clickable images as answer choice (WS: 121)

Engage respondents and increase response rates by using clickable images instead of the usual check boxes.

Customise survey checkboxes in Style mode (WS: 120)

Customise survey checkboxes to match your organisations branding.

Analysing several variables in a single table (WS: 119)

See how to create a single table combining data from four multi-choice style questions.

In-survey calculations: how to calculate a wait time and adapt the questionnaire text based on the answer (WS: 118)

This worksheet example tells you how to calculate how long someone waited to see a pharmacist and displays an apology if appropriate.

Tailored reports and analyses for associates (WS: 117)

Use ‘Context’ to configure Snap WebHost analyses and reports for a specific audience.

Managing survey respondents on Snap WebHost (WS: 116)

Did you know you can add, delete, or modify your respondent list for a survey, even while it is running? This worksheet tells you how.

Scanning validation patterns (WS: 115)

Scanning validation patterns help interpret handwritten replies more accurately and record responses in a consistent format. This worksheet describes how to create your own custom patterns, and also how to apply generic patterns for dates, postcodes and phone numbers.

Providing a photo response in Snap Mobile Anywhere using AttachIt (WS: 114)

You can use a photo as a response to a question in your surveys. If you’re interviewing using Snap Mobile Anywhere you can take a photo on your smartphone or tablet in response to a question. This worksheet tells you how to set up the survey and download the response files.

 Analyzing data with crosstabs (WS: 113)

You can find trends and patterns in your data by creating ordered crosstabs. This worksheet shows you how to produce them, order them and display them as charts.

Create a survey for face-to-face, kiosk and online completion (WS: 112)

Set up a survey for face-to-face mobile interviewing, on kiosks, and for completion online, and bring all the results together for analysis.

Using geolocation in your surveys (WS: 111)

This worksheet describes how to add the respondent’s location to a Snap Mobile Anywhere or a Snap WebHost survey.

Sending respondents to a customised web page if they save (WS: 110)

You can set up a Snap WebHost survey that allows respondents to save their responses and continue later.

Putting someone’s name or other details in an email (WS: 109)

This worksheet describes how to send an email from Snap WebHost that includes personalised information for your respondents (e.g. their name). This worksheet tells you how to insert the name of the person you are emailing into an invitation.

Putting a linked image in a Snap WebHost email (WS: 108)

This worksheet describes how to insert an image into a Snap WebHost email and then link it to a website. It assumes that you have already set up the survey in Snap with a database link which includes invite and reminder emails.

Using a cell reference to put the filtered base in a Summary Report (WS: 107)

How to Insert data as text, into a Summary report instruction, which is referencing a cell in a saved table. The example in this worksheet is inserting a filtered base figure.

Adapting the automatic Summary Report (WS: 106)

Customising the Summary Report in Snap desktop to make it more appropriate for your organisation.

Setting up filters for Snap WebHost analysis (WS: 105)

Snap version 11.07 onwards. This worksheet describes how to provide easy-to-use filters for analyses on Snap WebHost. These allow you and your associates to quickly filter the data used in your analyses and reports. It also covers how to hide reports and analyses so they cannot be seen on Snap WebHost.

Creating an adaptive questionnaire (WS: 104)

This worksheet applies to Snap version 11.07 onwards. It describes how to set up a Snap WebHost survey so that devices will see a version of the questionnaire tailored for their screen size.

Using Net Promoter Scores (NPS) in Snap (WS: 103)

This workpack describes how to create questions suitable for generating Net Promoter Scores in a Snap survey, and how to generate a Net Promoter Score from them. If you ask a rating scale question such as “How likely are you to recommend our company/product/service to your friends and colleagues?” you can analyse the responses to show how your customers see your company.

Setting up surveys for Snap Mobile Anywhere for iPad, iPhone, Android and Windows (WS: 102)

The latest Snap Mobile Anywhere app allows you (the researcher) to choose which surveys to share with your interviewers. You assign the surveys to their associate account on Snap WebHost. When they log into the Snap Mobile Anywhere app, they can see the surveys that you assigned to them. Interviewers can have an account each, or share an account. This worksheet shows you how to create the accounts and how to share the surveys with them. This worksheet applies to Snap Mobile Anywhere app version 4 and above, and Snap 11 WebHost.

Sending email invitations and reminders in Snap WebHost (WS: 101)

This worksheet describes how to connect a Snap WebHost survey to a database of respondents. It tells you how to set up the survey so you can: Set up email invitations and reminders and enable the respondents to access the survey directly from the email or, make the respondents log into the survey using a login page. Once you have connected the survey to the database and uploaded the published survey to Snap WebHost, this worksheet tells you how to check that it is all working correctly.

Creating a simple report (WS: 100)

This worksheet describes how to create a simple report consisting of a title, introduction, analysis and a conclusion. It assumes that you have already created any analyses that you wish to use in your report. You can run your report as often as you like, using the latest data to produce an up-to-date report. Once you have set up the report the way you like it, it will be produced like that every time you run it, with no chance of errors creeping in through copying or cut and paste.

Smart Reports: tailoring your data to a context (WS: 99)

This worksheet describes how to use contexts and filters to create a report that is tailored for a specific user. By setting a context, you can tailor the text and values in a report. By setting a filter, you can limit the data. In this worksheet, you add a list of comments to the report created in the worksheet Smart reports: creating multiple pdf reports using contexts. The comments will be filtered so that they only include comments for a specific restaurant. This is done by applying a filter based on context to the list analysis.

Smart Reports: creating multiple pdf reports using contexts (WS: 98)

This worksheet describes how to set up a Smart Report so it creates multiple pdf reports with Snap dynamically selecting the data depending on the context. It explains how to set up the survey in Snap so that it will produce all the reports that are needed, and then tells you how to set up the report instructions so that each report will be sent to a different pdf file.

Smart Reports: understanding contexts (WS: 97)

This worksheet describes how to set up a Smart Report so it dynamically selects the data depending on the context. The context is a variable containing a list of possible values.

Creating a Smart Report which includes automatic text (WS: 96)

This worksheet is the first of a series on how to use Smart Reports. Smart Reports can be re-run using the latest data to produce an up-to-date report. This worksheet describes how to use data from analyses in the report text. It also shows you how to use ordered tables so you can headline important points. For example, you can automatically include the aspects your customers are least satisfied with.

Using word clouds to display your results (WS: 95)

This worksheet describes how to create wordclouds from free text responses. Wordclouds allow you to display words or responses as a text graphic with the most common value written in the largest text. You can select how many items are displayed. Snap can automatically categorise open responses and uses a stop list to stop common words such as “and” or “the” being included in the word cloud. You can add words to the stop list and tailor the categories.You can create clouds from open responses or from the labels of coded responses.

Creating a grid combining multi-choice questions and literals (WS: 93)

This worksheet shows you two ways of combining a rating scale and a grid of literal responses into a single grid. You can use the two-column method for paper or online surveys, or the Compound Grid method for online surveys.

Using routing to limit the grid questions displayed (WS: 92)

This worksheet describes setting up a satisfaction survey where respondents select items to rate from a multi-choice list. Associated rating questions are only displayed for selected items. This is simple to do using routing.

Running a survey in kiosk mode (WS: 89)

This worksheet describes how to create and run a survey that is to be used in a standalone mode. It can run on a dedicated survey kiosk, or on a tablet or iPad. You can set controls such as how the survey behaves if people walk away without completing it or remove the ability to leave the survey.

Setting up Panel exit pages (WS: 88)

You may use an outside panel provider to provide the respondents for your survey. This worksheet describes how to communicate between your survey and the panel provider. It explains how to direct respondents to a specific web address at the end of each survey which includes a participant’s ID and exit status.

Filtering the analyses your clients see (WS: 84)

You can set up a filter for a survey so that your clients only see the data which is applicable to them. When your client logs into Snap WebHost and views analyses in a filtered survey, Snap WebHost filters the data before creating the analysis. The filter is not visible to the client.

Creating a question bank in a SurveyPak (WS: 81)

You can create a bank of questions in Snap which can be saved and used in more than one survey. These are known as SurveyPaks. This worksheet shows you how to use a question from Snap’s own reference SurveyPak, how to create a new SurveyPak and how to store your own questions in it.

Sending email alerts if participants select an answer (WS: 80)

This worksheet describes how to get Snap WebHost to send an email to a specified address when respondents select a particular answer. It also describes how to set the condition to choose if the emails are sent.

Using YouTube videos in your survey (WS: 79)

This worksheet shows how to link to videos on the YouTube site (for example, our video Getting Started with Snap WebHost).

Preparing surveys for smartphones (WS: 76)

Snap version 10.17 has improved web survey layout on smartphones such as the iPhone and Blackberry. However, because smartphones have limited screen space, a mobile internet connection (which may use a slow speed) and small keyboards, it is sensible to adapt your surveys if you know that they will be viewed on smartphones. This worksheet discusses the issues involved in designing a survey for smartphones. It describes the facilities in Snap to help you. It gives an example of changing a survey so that it conforms to the guidelines for use on a smartphone.

Transferring data between a Snap survey and a database (WS: 75)

This worksheet describes how to link between a Snap survey and an SQL Server database, so you can use your existing database to seed your survey, or send updated data from your survey back to your database. You can set this up to happen automatically by using a Hot Link. This worksheet describes how to import data from an SQL server database. Exporting data is done in a similar manner.

Translating your Snap survey (WS: 74)

This worksheet explains how to export a file to send to an external translator and re-import the translated text to create a bilingual survey. The example uses a translation from English to Spanish.

Adjusting quotas after you have received replies (WS: 73)

Sometimes you wish to adjust a quota after you have received some replies. This worksheet explains how to make the responses in your new desktop quota match the responses when you upload the new version to Snap WebHost. It also tells you how to export data from your survey, delete the data in your survey, and import the data again.

Using the Totalize function to add up responses as they arrive (WS: 72)

This worksheet shows you how to do this using the Totalize (or Totalise) function in the Snap Toolkit. The Totalize function calculates a running total as the respondent completes the answers. It explains how to create a set of Open First and Open Next questions for quantity responses, and use Totalize to put a running total into the final response. It also shows you how to set a valid range on the total, so that respondents cannot move to the next page if the total has overrun.

Randomizing the order of question pages (WS: 71)

When you present a respondent with a survey, their answers are influenced by the order in which questions are presented. This is known as an order-effect. Because of this, you may wish to randomize the order of the questions, so that this effect is as small as possible. In Snap you can randomize the order of possible responses in a multi-choice question, rows in a grid question, or question pages. This worksheet explains how to randomize the order in which question pages are presented to the respondent using the Randomize (or Randomise) tool.

Banding quantity variables for analysis (WS: 70)

When you have a quantity question in your survey, you sometimes want to split the results into bands for analysis (for example, when you wish to split ages or salaries into ranges). There is a quick way of doing this using numeric variables. Numeric variables are a type of derived variable, i.e, they contain information that is derived from people’s responses. This worksheet will use the data in the snCrocodile survey supplied with Snap to show you how to band the amount spent.

Scanning a booklet (WS: 68)

This worksheet describes how to create a questionnaire in booklet format and then scan the returned questionnaires.

Putting counts and percentages on a bar chart (WS: 66)

Bar charts normally display one value per bar. You can choose whether this is the count, (number of respondents who chose that response), or the percentage (number of respondents as a percentage of the total). This worksheet explains how to create a bar chart that shows both the counts and the percentage values on a single chart.

Working with rating scale questions (WS: 65)

One of the most useful forms of question is a rating scale, where you ask people to mark how satisfied they were with an item or a service. You can then analyse the answers to these questions to see if people are generally satisfied or dissatisfied, so you are more able to judge where to put the effort in to improve what you offer.

Using filters to find a subset of respondents (WS: 63)

Use filters to break down the data you are displaying or analysing, so you only see the data that is appropriate.

Getting your data into Snap from the web (WS: 61)

This worksheet describes how to import your emails for analysis and what problems you might meet along the way.

Laying out a grid question for a Web survey (WS: 59)

Snap provides several tools to assist you in laying out questions and adjusting positioning of the separate elements. This worksheet describes adjusting the layout of a grid question.

Adapting the Slider Control templates for your own use (WS: 56)

Snap provides several templates for Slider Controls that you can use in your questionnaires. Sometimes these may not be exactly what you need. This worksheet describes how to change one of the templates to make the bar in the Slider Control longer and display the code label for the setting rather than a graphic.

Using a clickable map to create a star rating scale (WS: 54)

With Snap 10 you can use image maps to create rating scales. The software comes with a number of 5-star rating scales that enable a respondent to select from one to five stars as their response. This worksheet explains how the rating scale has been created, and shows you how to change the default colors.

Removing Deleted Respondent Data (WS: 52)

Snap stores respondent data in a file with the survey name and extension .rdf (respondent data file). Replies for each respondent are held in individual records in that file. When respondent records are deleted, they remain as empty records in the file. Although they do not affect the analyses, it is sometimes useful to remove the empty records completely.

Setting a “do not ask” condition on multiple questions (WS: 51)

This worksheet describes how to set the same condition on a complete grid, so that depending on the respondent’s choices, they do not have to complete irrelevant sections.

Calculating the difference between times on different dates (WS: 50)

How to calculate the difference in hours from a start date and time and an end date and time, and use the results for analysis.

Adding extra information in pop-up windows and labels (WS: 49)

You might want to have extra information available for a HTML or Snap Online WebHost survey that doesn’t interfere with the questionnaire. You can do this by putting a link in your survey which opens in a separate browser window. You can link to standard sites, or the documents that you have created which provide additional material for respondents.

Using scores to analyse satisfaction questions (WS: 48)

Make more sense of rating questions, find out how to convert rating questions into mean values by assigning scores. If you have satisfaction or other questions where users rate something from one to five, you can convert this into more useful mean values by analysing the responses using a score.

Creating a combination chart to display respondent means as points and bars (WS: 45)

How to use a combination chart to display the means of groups of respondents in a satisfaction survey to the mean responses of all respondents. Create a derived variable called “All” which includes all respondents, and then shows you how to produce a chart of the satisfaction ratings, with total responses displayed as bars, and the individual breakdowns by male and female displayed as points.

Back-up and share surveys using archive and restore (WS: 44)

It is easy to backup a survey, complete with data, to share with colleagues or to refer back to later should the need arise. This article shows you how.

Giving a consistent look and feel to all your charts (WS: 42)

You can save and apply chart styles in Snap in the same way that you can save and apply questionnaire styles. If you wish to have a consistent look and feel for the analysis charts you produce, you can create a style that only contains the colors and background definitions. You can then apply that style to any chart to make it appear in your organisation’s colors. This worksheet shows you how.

Adding name and address information to a printed survey (WS: 41)

If you are producing a printed questionnaire for known respondents, you can set up Snap to insert the respondents’ names and addresses on the front page of the questionnaire, and then mail them directly.

Using Rating Check to ensure ranking of options (WS: 39)

You can set up a grid question, which has a rating scale along the top, and the items to be rated down the side (or vice versa) and then ask respondents to rank the items in order. If you want to make sure that they give a unique rank to each value, you can apply the necessary constraints by using the rating check tool.

Worksheet on Randomly selecting questions (WS: 38)

This worksheet shows how to generate pseudo-random values to use in routing or other calculations. In particular we consider the problem where you might have 3 sets of random questions in the survey to which you want to randomly present one set to each of your respondents

Dynamically specifying the web address that respondents get directed to at the end of a survey questionnaire (WS: 36)

When respondents complete an online survey, you can specify the website that they are then taken to. You can set up the website address to be specific to a respondent by including one or more survey variables in it.

Creating compound grids (WS: 35)

You can place question grids next to each other to make them easier to complete. For example, you could combine two grid questions on goods and services; one on how satisfied people are with them, and the other on how important they are to people.

Creating a custom login page (WS: 34)

The New Year worksheet looks at changing the look of survey login pages. It explains how to add text and graphics to a login page. As a bonus it also covers how to set up the invitation email so that the respondent is logged in automatically, saving them trouble while providing you with their login details for reference.

Analysing two surveys together (WS: 33)

Merging surveys in Snap has become even easier using a database link. This worksheet tells you how to merge slightly different surveys and set up a derived variable to identify them for analysis.

Creating a new language edition of your questionnaire (WS: 32)

This worksheet describes how to publish the same survey in multiple languages. The tutorial covers creating a dual-language questionnaire in Welsh and English for Snap WebHost.

Interlocking quotas in Snap WebHost (WS: 27)

This worksheet explains how to limit respondents in multiple categories, for example, by gender and age. This is known as an interlocking quota.

Quotas (WS: 26)

Quotas allow you to specify maximum numbers of respondents in particular groups and are helpful in maintaining stratified samples.

Using patterns to categorise postcodes into postal area (WS: 25)

This worksheet looks at applying a pattern at analysis stage. This particular example uses a derived variable in conjunction with a pattern, to extract the postal area part from a full UK postcode.

Masking Code Boxes (WS: 22)

Code boxes, along with code labels (i.e. response options) can be hidden for multiple and singe response type questions. These response options can be hidden in a matter of two ways, statically and dynamically.

How to display a currency sign beside a code box (WS: 21)

When questions are designed which require currency values to be clearly identifiable, include the words or symbols representing the currency outside the applicable box. This will indicate to the interviewee that only a numeric value needs to be entered.

The Do’s and Don’ts of Scanning (WS: 18)

The Snap Scanning Module is a powerful product that is a cost-effective way to collect data quickly and efficiently. When designing a survey there are always do’s and don’ts so we advise you to bear the following in mind.

Scanned Image Data Reports (WS: 17)

Snap’s optional scanning module has the facility to print scanned image data reports of data that has not yet been detected or keyed in. Consequently, Literal Response questions do not need to be keyed in or coded prior to analysis. This is achieved by selecting the Scanned Questionnaire radio button, which creates a report read from the scanned image, as distinct from Summary, taken from a survey’s data (.rdf) file.

Gap Analysis: Compare results from satisfaction and importance questions (WS: 16)

Gap analysis in Snap shows the difference between how important attributes/services are to your respondents and how satisfied they are with those attributes/services. It is a really useful way of comparing the results from your satisfaction and importance questions and can be used as a tool for interpretation.

Saving your Questionnaire Design as a Template (WS: 13)

This worksheet shows you how to create and apply a Style Template to your questionnaire, which can then be used in all your questionnaires. This is particularly useful if you have a ‘house style’ that you want to use across all your questionnaires.

Calculating the Time in Minutes between Two Time Variables (WS: 11)

Snap has the capability to analyse times of the day using the 24 hour clock. If a questionnaire contains a start time and end time question, Snap can calculate the time difference between the two answers.

Merging data (WS: 9)

This worksheet explains how to use the Database Link Wizard to import data from another Snap survey even where the two surveys are not identical.

Calculating the Number of Days between Two Dates (WS: 8)

Calculating the number of days between two dates is easy as this worksheet shows.

Calculating marks in a quiz, test or assessment (WS: 7)

Using a weight matrix, Snap has the ability to differentiate between responses to a particular question as being correct or incorrect.

Analyzing Dates (WS: 6)

Snap includes a number of operations and functions specifically designed to help in Analyzing dates.

Analyzing Post codes and Zip codes (WS: 5)

Analyzing Post codes or Zip codes using a Derived Single Response variable.

Exporting Data from Snap to Excel (WS: 3)

How to export data from Snap to Microsoft Excel and other applications in simple steps.

Couldn’t find what you were looking for?

We’re working to add the resources you need to the Support Hub. If you think there’s a topic we should cover, please let us know by completing this form.